Cart 0

Total: €. 0.00

Ultra flat “Millennium” Reel

€. 430,00

Item: 7301

Availability: In stock

Produttore: NEGRINI

“Millennium” Reel. ULTRA-FLAT. Only 4.8cm. thickness!

• ENTRY/EXIT DIRECT CONNECTION. Thanks to a new, patented design, the MILLENNIUM Reel does not use rotating rings with rotating brushes or mercury contacts. Therefore, all the problems associated with rotating contacts have been eliminated, including faulty rotational contacts and their maintenance and replacement.

• GREATER EFFICIENCY. The 3 springs used for rewinding the cable double-up as wires for the three electric signals. This provides for greater efficiency since there are no contacts.

• ULTRA FLAT. The reel's thickness is just 4.8cm, slightly more than the piste's height.

• FEWER WINDING TURNS. The diameter of the cable coil is 31cm. Therefore the reel can wind the 20-meter cable in just 20 turns. By contrast, currently available reels require 40 to 50 turns.

• LONGER LASTING SPRINGS. The spring work is greatly reduced thanks to fewer turns of the cable coil. The central pin where the springs turn is large in diameter (3.6cm) and thus reduces the stress of the spring on this fragile location. 3 springs are used, working in concert to reduce stress on any one spring.

• HIGH QUALITY SPRINGS. The springs are made from a special top-quality steel strip.

• LONGER LASTING CABLE. The large diameter of the cable coil not only enlarges the cable chamber, but also reduces the number of its bends. Therefore the cables are longer lasting.

• STRONG STAINLESS-STEEL CASE. The case is sturdy and easy to clean. In addition, thanks to its flat, square shape, it is easy to carry and store.

• ADVERTINSING SPACE. The top of the reel has flat surface area of 33cm x 33cm, allowing for advertising space.

• VERY STEADY. Thanks to its solid 4.8kg. of weight and its four "rubber feet”, the reel is extremely steady - pulls on the cable during matches hardly move the reel.

• CABLE PROTECTION DAMPING SPRING. The cable next to the fencer's end socket usually requires many repairs over time. To reduce this problem, a 10cm. spring has been inserted to - minimize bending of the cable at the socket exit, and - dampen the stress on the cable when the socket reaches the reel after the fencer's release.

• NEW BRAKING SYSTEM. The reel's design moderates the speed of winding when the cable is released from longer distances. The braking mechanism exploits centrifugal force and activates only when the reel exceeds a certain rotary speed. Strong or “bad” pulls received by the cable at the end of the run are therefore avoided.